Beta Marine’s range of saildrive units are complemented by a complete range of spares and accessories.
Complete with air vent, 2 metres of hose and clips. An ‘antisiphon kit’ must be used to stop cooling water entering the engine if the point where the cooling water is injected into the exhaust is less than 15 cms above the waterline (worst case when heeling). The valve should be fitted at least 40 cms above the waterline.
Battery Isolating Switch
100 Amp version shown.
25mm2 conductor cross sectional area x 1m long. (Generally speaking for smaller engines under 110kW / 150hp, we recommend battery cables of 25mm2 conductor cross sectional area with length up to 1.5m per cable).
Single Lever Control Head
Side mounting, for controlling engine speed and gearbox selection.
3m long – to suit the ‘single lever control head’. These are available in longer lengths – please ask.
R&D Flexible Coupling
An R&D flexible nylon disc that is supplied as standard with our ‘Small Engine Range’. The couplings are made from a polyester elastomer which is not affected by salt water, diesel and lubrication fluids – a very good economical solution.
R&D Clamp Coupling
Suitable for clamping onto your propeller shaft and fitting to the R&D flexible disc. These are available in 25mm and 1” bore.
CentaFlex Type 12 & 16 Couplings
These are good quality flexible couplings, designed with plenty of rubber to absorb torsional shocks and loads. The‘CentaFlex’ coupling is complete, replacing both the R&D flexible and the R&D clamp couplings above. Standard bore sizes are: 25mm.
Water Cooled Exhaust Kit
Comprising of 3m of exhaust hose, skin fitting, and stainless steel clips (gooseneck is not included).
Wet Exhaust Waterlock
Waterlock silencer with stainless steel clips.
Dry Exhaust Silencers
Standard: 68 cms x 12 cms diameter.
‘Hospital’ High Attenuation: 87 cms x 30 cms diameter.
Flexible Fuel Pipe Connections
Required if the engine is flexibly mounted.
Fuel Delivery Kit / Fuel ‘Leak Off’ Kit
Comprising of 5m of copper pipe with end fittings for connection to fuel tank and flexible fuel pipe.
Electric Fuel Lift Pump
Diesel Fuel Filter / Water Separator
Water Inlet Kit
Comprising of seacock with strainer and 2m of pipe with clips.
Remote Header Tank Kit
Soft Shift for PRM Gearboxes
Suitable for PRM 260, 280, 500, 750 and 1000 models
PRM gearboxes are renouned for their quality and reliability, however in some applications and/or circumstances they can be slighlty abrupt and noisey when gear changes are made and a transmission ‘jolt’ maybe experienced.
The Beta Marine ‘Soft-shift’ option slows down the gear engagement time which provides a smooth and silent transition between forward, neutral and reverse.
Sound Deadening Material
38mm thick including a layer of dense material (5kg/m2 polymeric barrier) and metalised surface finish stopping absorption of oil.
Short Voyage Spares Kit
Small Engine Range
In a plastic toolbox including: 2 x oil filters, fuel and air filter, impellor, ‘O’ rings, Polyvee belt, anode and fuse. All components will differ, dependant upon engine model.
Short Voyage Spares Kit
Mid Engine Range
In a plastic toolbox including: 2 x oil filters, fuel and air filter, impellor, ‘O’ rings, V belt, anode and fuse. All components will differ, dependant upon engine model.
Travel power controller and remote panel.
Stern Gear Water Lubrication Kit
Comprising of brass connection, 3m of pipe and stainless steel clips.