Steel Base Frame

Image is for illustrational purposes and not necessarily representative and will vary by generating set model/specification.

Optional for all 4 Pole BetaSet & 2 Pole BetaSet models.

Note: Not required for 4 Pole BetaGen or 2 Pole BetaGen models.

Water Inlet Kit

Comprising of seacock with strainer and 2m of pipe with clips.

Optional for all 4 Pole BetaSet/BetaGen & 2 Pole BetaSet/BetaGen models,
excluding the BetaSet/BetaGen 26, 33, 40, 40T, 49 & 49T.

Wet Exhaust Kit

Comprising of 3m exhaust hose, skin fitting and stainless steel clips (gooseneck is not included).

50mm diameter hose.

Optional for all 4 Pole BetaSet/BetaGen 7, 10, 12, 14 & 21
& 2 Pole BetaSet/BetaGen 4/2, 6/2 & 11/2.

60mm diameter hose.

Optional for all 4 Pole BetaSet/BetaGen 26 & 33
& 2 Pole BetaSet/BetaGen 22/2 & 25/2.

90mm diameter hose.

Optional for all 4 Pole BetaSet/BetaGen 40, 40T, 49 & 49T.

Wet Exhaust Waterlock Silencer

Waterlock silencer with stainless steel clips.

Optional for all 4 Pole BetaSet/BetaGen & 2 Pole BetaSet/BetaGen models.

Antisiphon Kit

Complete with air vent, 2m of hose and clips.

An antisiphon kit must be used to stop cooling water entering the engine if the point where the cooling water is injected into the exhaust is less than 15cm above the waterline when heeling. In this case the valve should be fitted at least 40cm above the waterline.

Optional for all 4 Pole BetaSet/BetaGen & 2 Pole BetaSet/BetaGen models.

Remote Header Tank Kit

Remote mounted coolant header tank expansion kit, complete with tank, mount fittings, 1.5m x 3/4” pipe and clips.

Optional for all 4 Pole BetaSet/BetaGen & 2 Pole BetaSet/BetaGen models.

Dry Exhaust Outlet

Including exhaust elbow and flexible stainless steel bellows – in lieu of water injection bend.

Image shows an exhaust elbow and flexible stainless steel bellows with dry lagging.

Note: Dry lagging is only included as standard when a generating set is installed in a Beta Marine acoustic housing.

1-1/2” BSP.

Optional for 4 Pole BetaSet/BetaGen 7, 10, 12, 14 & 21
& 2 Pole BetaSet/BetaGen 4/2, 6/2 & 11/2.

2” BSP.

Optional for 4 Pole BetaSet/BetaGen 26, 33, 40, 40T, 49 & 49T
& 2 Pole BetaSet/BetaGen 22/2 & 25/2.

Dry Exhaust Silencer

1-1/2” BSP inlet and outlet, 68cms x 12cms diameter.

Supplied loose with 1 x 1-1/2″ BSP female to female coupling.

Optional for all 4 Pole BetaSet/BetaGen 7, 10, 12, 14 & 21
& 2 Pole BetaSet/BetaGen 4/2, 6/2 & 11/2.

2” BSP inlet and outlet, 68cms x 12cms diameter.

Supplied loose with 1 x 2″ BSP female to female coupling.

Optional for all 4 Pole BetaSet/BetaGen 26, 33, 40, 40T, 49 & 49T
& 2 Pole BetaSet/BetaGen 22/2 & 25/2.

Cooling Air Ducting

3m of flexible ducting for cooling air outlet, 125mm diameter.

Note: Images are illustrational only and do not represent a full 3m length.

Optional for 4 Pole BetaSet/BetaGen 7, 10 & 12
& 2 Pole BetaSet/BetaGen 4/2, 6/2 & 11/2.

Diesel Fuel Water Separator

Diesel fuel filter water separator complete with brass compression fittings and keyed removable water drain plug.

Supplied loose and should be fitted in all installations.

Recommended to be drained monthly.

Optional for all 4 Pole BetaSet/BetaGen & 2 Pole BetaSet/BetaGen models

Battery Cables

Colour coded starter battery cables, protected negative and positive battery clamps and secure connection bolt eyelets.

2 x 1m 120 Amp battery leads.

Optional for 4 Pole BetaSet/BetaGen 7, 10, 12, 14, 21, 26 & 33
& 2 Pole BetaSet/BetaGen 4/2, 6/2, 11/2, 22/2 & 25/2.

2 x 1m 180 Amp battery leads.

Optional for 4 Pole BetaSet/BetaGen 40, 40T, 49 & 49T.

MCCB with External Power Socket

Moulded Case Circuit Breaker with female external power socket and IP56 protection. Supplied fitted and pre-wired to the generator output terminals.

Illustrated is a generating set with optional base frame with a mounted MCCB with 32 Amp output socket, other Amp rated sockets and mounting positions are available.

Optional for all 4 Pole BetaSet/BetaGen & 2 Pole BetaSet/BetaGen models.

Image is for illustrational purposes and not necessarily representative and will vary by generating set selection and customer requirements.