DSE7310 MK II Control Module & DSE7310 MK II Display Module for Local & Remote Operation
Optional Module for all BetaSet/BetaGen
The DSE7310 MK II is an Auto Start Control Module suitable for a wide variety of single, diesel generating set applications. Monitoring an extensive number of engine parameters, the module will display warnings, shutdown and engine status information on the back-lit LCD screen, illuminated LEDs, remote PC and via SMS text alerts (requires optional external modem). The module includes USB, RS232 and RS485 ports as well as dedicated DSENet® terminals for system expansion.
The module is compatible with electronic (CAN) and non-electronic (magnetic pick-up/alternator sensing) engines and offers an extensive number of flexible inputs, outputs and extensive engine protections so the system can be easily adapted to meet the most demanding industry requirements.
The extensive list of features includes enhanced event and performance monitoring, remote communications, PLC functionality and dual mutual standby to reduce engine wear. The module can be easily configured using the DSE Configuration Suite PC software. Selected front panel editing is also available.
The DSE7310 MK II has engine control and monitoring functions including manual engine start, automatic engine start with timed pre-heat, engine stop, engine hours run meter, over speed, low lubricating oil pressure* and high water coolant temperature*.
Up to three DSE7310 MK II display modules can be connected to a DSE7310 MK II control module, each can be positioned up to a maximum distance of 1km away. Each display module will remotely offer exactly the same instrumentation, control and monitoring capabilities as the host control module, including starting and stopping of the engine*.
*Automatic shutdown protection on fault function.
Additionally subject to the generating set specification/installation the DSE7310 MK II is additionally able to monitor the following parameters:
Engine: under/over speed, starter battery alternator no charge, fuel usage monitor and low level alarm.
Generator: under/over voltage, under/over frequency, power as kW h, kV Ar, kV Ah, kV Ar h & 3-phase sensing.
Configurable for:
- Display languages
- Magnetic pick-up/alternator sensing (must be specified at time of order).
- 9 inputs and 8 outputs.
- 3 maintenance alarms.
- Multiple date and time run scheduler.
- True dual mutual standby with load balancing timer enabling two set systems to be configured to allow for redundancy or balancing run hours.
- Load switching, load shedding and dummy load outputs.
- 250 event logs.
NB: This control module is offered as standard with Beta Marine Bespoke Generating Sets, whilst it is also available for use with all BetaSet / BetaGen models please note that not all the parameter monitoring listed above will be available.
The DSE7310 MK II display module is designed to integrate with the DSE7310 MK II Auto Start control module. Up to three display modules can be connected to the host control module, and can be positioned to a maximum distance of 1km away. The remote displays offer exactly the same instrumentation, control and monitoring capabilities as the host control module, including starting and stopping of the engine. All remote displays connected to the same system, will show the same information at any one time, while the host controller is able to display different information.
The modules are simple to operate and feature the same user-friendly menu layout as the host module. All communications and configuration are done via the host module only. The remote devices simply mirror the configuration of the host module, making the system quick and easy to install.
