Diesel Marine Propulsion Engines & Generating Sets

Project Description

Beta 85T

Technical Specifications

Power: 85 hp @ 2,800 rpm
Aspiration: Turbocharged
Cylinders: 4
Displacement: 3331 cc
Weight: 359 kg
Propeller: 18” x 12”

A general guidance for propeller size in inches, based upon 3 blade RH rotation and reduction ratio of 2:1. *For accurate individual advice please provide us with your vessels current full specifications.

Standard Specifications

  • RCD 2 (Recreational Craft Directive 2013/53/EU) exhaust emission compliant.
  • EPA (U.S Environmental Protection Agency) Tier 3 – 40 CFR 1042 exhaust emission compliant.
  • Mechanically governed comes with:
    • Heat exchanger, header tank and water cooled exhaust manifold.
    • Fresh and sea water pump, injection bend for a wet exhaust.
    • Mechanical fuel lift pump, fuel and oil filtration and sump pump.
    • Flywheel housing and drive plate with heavy inertia ring for super smooth running at low rpm.
    • Special quiet air intake filter.
  • 70 Amp, 12 Volt battery charging alternator.
  • Complete with ‘ABV’ control panel with tachometer with running hour recorder, keystart switch, push button stop, green light for ‘power on’, red warning lights and audible alarm for: low oil pressure, high water temperature, domestic and engine alternator ‘no charge; 3m interconnection cable with multi pin plug connector.
  • Heavy duty engine feet with flexible mountings and gearbox coupling disc.
  • ‘Morse’ type end fittings for engine speed and gearbox control.
  • Engine test certificate and operators manual.
  • 5 year ‘self-service’ engine warranty, recreational use only!
  • Beta red paint.

Gearbox Options

Beta Marine offer the following standard gearbox options and reduction ratios. Gearboxes have been selected to match the torque loading of each engine and will be correct for the majority of yachts, motor sailors or motor boats. Find out more…

Bobtail – No Gearbox
Bobtail Engine with Drive Plate & Housing Only Standard
Technodrive / Twin Disc
TM345 – Hydraulic Standard
TM345A – 8° Down Angle, Hydraulic Optional
TM93 – Hydraulic Optional
TM93A – 8° Down Angle, Hydraulic Optional
PRM Marine
PRM280 – Hydraulic Standard
PRM260C – In-line Hydraulic Optional
PRM500 – Hydraulic Optional
ZF
ZF45 – Hydraulic Standard
ZF45A – 8° Down Angle, Hydraulic Standard
ZF63IV – 12° V Drive, Hydraulic Standard

Control Panel Options

Beta Marine offer a range of control panels to cater for various requirements. Click on any of the thumbnail images to view a larger more detailed image of the control panel. Find out more…

beta marine contol panel a

A Panel
Optional

beta marine contol panel abv

ABV Panel
Standard

beta marine contol panel abvw

ABVW Panel
Optional

beta marine contol panel b

B Panel
Optional

BW Panel
Optional

beta marine contol panel c deluxe

C Deluxe Panel
Optional

CW Deluxe Panel
Optional

D Digital Panel
Optional

Flybridge Control
Optional

Electrical Options

We offer a selection of different alternator options (subject to additional cost) to suit most requirements for heat exchanger engine use. However, if you require an alternative solution with specific alternators we can usually design, manufacture and fit suitable alternator supports and pulley drives to suit your needs. Find out more…

Note: Minimum recommended battery: Not included.

12v 180Ah 1050CCA

12 Volt Alternators
70 Amp, 12 Volt Alternator Standard
120 Amp, 12 Volt Alternator in Lieu of Standard Optional
70 Amp, 12 Volt Insulated Return Alternator Optional
100 Amp, 12 Volt Insulated Return Alternator Optional
175 Amp, 12 Volt Secondary Domestic Alternator Optional
24 Volt Alternators
55 Amp, 24 Volt Electric Start & Alternator Optional
80 Amp, 24 Volt Secondary Domestic Alternator Optional
60 Amp, 24 Volt Secondary Domestic Insulated Return Alternator Optional
Travel Power
3.5 kVA Travel Power – 230 Volt, Single Phase 50Hz Optional
5.0 kVA Travel Power – 230 Volt, Single Phase 50Hz Optional

travel_power

Special Feet Service

Beta Marine engines have been fitted into tens of thousands of vessels around the world using our standard engine feet. However engine bearers can vary immensely so when a problem arises, our solution is to offer our unique service of designing and manufacturing “Special Engine Feet” to suit your individual engine bearers.

Having designed, manufactured and supplied thousands of bespoke “Special Feet” when required, the additional cost of this option is heavily repaid when your new engine just drops onto your existing engine bearers and lines up with your propeller shaft reducing installation complexity, time and labour. Find out more…

Accessories

Beta Marine seagoing propulsion engines are complemented by a complete range of installation accessories. Find out more…

Literature & Manuals

Beta 43 – Beta 115T H/E
Sales Brochure

Beta 85T H/E
Engine Data Sheet

Beta 10 – Beta 115T H/E
Operators Maintenance Manual

Beta 70T & Beta 85T
Illustrated Parts List

TM345 & TM345A Gearbox
Operators Maintenance Manual

TM93 & TM93A Gearbox
Operators Maintenance Manual

PRM280 Gearbox
Operators Maintenance Manual

PRM260C In-Line Gearbox
Operators Maintenance Manual

PRM500 Gearbox
Operators Maintenance Manual

ZF45, ZF45A & ZF63IV Gearbox
Operators Maintenance Manual

TM93 Trolling Valve
Operators Maintenance Manual

TM345 Trolling Valve
Operators Maintenance Manual

Dealer Locator

When ordering an engine we always recommend that you talk to your local Beta Marine Dealer / Distributor about what you are looking for, so that you can agree a specification of the engine and accessories you require and they will then quote you. If you don’t have a local dealer then you or your installation engineer can contact the Beta Marine Help Desk.

International Distributors

When ordering an engine we always recommend that you talk to your local Beta Marine Dealer / Distributor about what you are looking for, so that you can agree a specification of the engine and accessories you require and they will then quote you. If you don’t have a local dealer then you or your installation engineer can contact the Beta Marine Help Desk.

Online Enquiry Form

(If Applicable)

When using the contact form or an email address within this website you will be providing Beta Marine Ltd some very limited personal information. This information is used only in the scope of performance of contract or fulfilment of the requested service such as processing your enquiry or providing bespoke technical support.

After completion of the performance of contract or fulfilment of the requested service the personal data you have provided is first securely stored for future reference and or further support. After a period of 24 months the data you have provided is securely deleted.

All forms and emails are delivered by a Hypertext Transfer Protocol Secure HTTPS method.

reCAPTCHA is required.

Back to Top
beta marine