Installation Recommendation

.

Standard Specifications

• RCD 2 (Recreational Craft Directive 2013/53/EU) exhaust emission compliant.
• EPA (U.S Environmental Protection Agency) Tier III – 40 CFR 1042 exhaust emission compliant.
• Mechanically governed comes with:
  • Keel cooled header tank and water cooled exhaust manifold.
  • Fresh water pump, male dry exhaust outlet & loose fuel/water separator.
  • Mechanical fuel lift pump, fuel and oil filtration.
  • Flywheel housing and drive plate with heavy inertia ring for super smooth running at low rpm.
  • Special quiet air intake filter.
• 45 Amp, 12 Volt battery charging alternator.
• 175 Amp, 12 Volt domestic battery bank alternator.
• Complete with ‘C Deluxe’ control panel with tachometer with running hour recorder, keystart switch, push button stop, green light for ‘power on’, red warning lights and audible alarm for: low oil pressure, high water temperature, domestic and engine alternator ‘no charge; 3m interconnection cable with multi-pin plug connector.
• Heavy duty engine feet and flexible mountings.
• ‘Morse’ type end fittings for engine speed and gearbox control.
• Engine test certificate and operators manual.
• Beta green paint.

Gearbox Options & Technical Drawings

Beta Marine offer the following standard gearbox options and reduction ratios. Gearboxes have been selected to match the torque loading of each engine and will be correct for the majority of Narrowboats, Wide Beams or Dutch Barges. Find out more…

Bobtail – No Gearbox
Bobtail Engine with Drive Plate, Housing & Oil Cooler for Hydraulic Gearbox	Optional

Hydraulic Drive
Full Hydraulic Drive in Lieu of Gearbox	Optional

Technodrive / Twin Disc
TM345 – Hydraulic	Optional

PRM Marine
PRM150 – Hydraulic	Standard
PRM280 – Hydraulic	Optional

Control Panel Options

Beta Marine offer a range of control panels to cater for various requirements. Click on any of the thumbnail images to view a larger more detailed image of the control panel. Find out more…

Electrical Options

We offer a selection of different alternator options (subject to additional cost) to suit most requirements for heat exchanger engine use. However, if you require an alternative solution with specific alternators we can usually design, manufacture and fit suitable alternator supports and pulley drives to suit your needs. Find out more…

Note: Minimum recommended battery: Not included.

12v 94Ah 620CCA

12 Volt Alternators
45 Amp, 12 Volt Alternator	Standard
175 Amp, 12 Volt Secondary Domestic Alternator	Standard
Lithium Ion Battery Charger Alternator 130 Amp, 12 Volt in Lieu of Secondary Alternator	Optional

24 Volt Alternators
80 Amp, 24 Volt Secondary Domestic Alternator in Lieu of Standard (Polyvee Drive)	Optional
100 Amp, 24 Volt Secondary Domestic Alternator in Lieu of Standard – Port Side Mounted (Polyvee Drive)	Optional

Travel Power
3.5 kVA Travel Power – 230 Volt, Single Phase 50Hz	Optional
5.0 kVA Travel Power – 230 Volt, Single Phase 50Hz	Optional

Special Feet Service

Beta Marine engines have been fitted into tens of thousands of vessels around the world using our standard engine feet. However engine bearers can vary immensely so when a problem arises, our solution is to offer our unique service of designing and manufacturing “Special Engine Feet” to suit your individual engine bearers.

Having designed, manufactured and supplied thousands of bespoke “Special Feet” when required, the additional cost of this option is heavily repaid when your new engine just drops onto your existing engine bearers and lines up with your propeller shaft reducing installation complexity, time and labour. Find out more…

Super Silent Options

Although our engines are “quiet” by comparison with other diesels, for customers who demand especially quiet cruising Beta Marine have developed a highly insulated acoustic enclosure option for an appropriate range of keel cooled engines. Find out more…

PRM Marine
PRM150 – Hydraulic	Standard
PRM280 – Hydraulic	Optional

Hybrid Propulsion

The Beta Marine, Hybrid-Marine partnership has delivered a state of the art, robust and reliable hybrid solution for Narrowboats, Wide Beams & Dutch Barges. Hybrid systems are based on our renowned Greenline range of engines and available for the Beta 43 through to the Beta 115. Find out more…

Standard Specification

• 10kW Single engine mounted electric motor/generator, control box and control panel.
• 12v 45 Amp Engine starter battery alternator.
• Twin 24v 60 Amp Engine domestic battery alternators.
• 48v @ 400Ah Battery bank – 4 < 6 10kW Narrowboat electric propulsion hours.
• Battery auto watering and venting system.
• Battery monitor.
• 3kW (6kW Peak) charger/inverter.
• Cross charger for single 12v buffer battery – may be bow mounted to provide bow thruster power if required.

Gas Free Boat Specification

• 48v @ 800Ah Battery bank upgrade – 8 < 12 10kW Narrowboat electric propulsion hours.
• 5kW (10kW Peak) charger/inverter.

Accessories

Beta Marine inland waterway propulsion engines are complemented by a complete range of installation accessories. Find out more…

Literature & Manuals

Beta 43 – Beta 60
Illustrated Parts List

TM345 & TM345A Gearbox
Operators Maintenance Manual

PRM150 Gearbox
Operators Maintenance Manual

PRM280 Gearbox
Operators Maintenance Manual

PRM500 Gearbox
Operators Maintenance Manual

Dealer Locator

Beta Marine approved mobile installation / service engineers and spare part stockists maybe found by clicking or tapping on the canal filter box and selecting your canal network within the interactive map below. If your location has no convenient nearby mobile installation / service engineer please contact the Beta Marine Help Desk.

Online Enquiry Form

If you are human, leave this field blank.

Your Name *

Company

(If Applicable)

Contact Phone *

Address

Contact Email *

Country *

Confirm Email *

Enquiry or Comments

Type of Vessel

Narrowboat

Wide Beam / Dutch Barge

Length of Vessel (Waterline Length)

Type of Engine Required

Heat Exchanger Cooled

Keel Cooled

Current Engine Type and Power

Engine Power Required

Where Will Your Vessel be Moored During Installation *

Do You Require A/C Power

3.5 kVA Travel Power

5.0 kVA Travel Power

When using the contact form or an email address within this website you will be providing Beta Marine Ltd some very limited personal information. This information is used only in the scope of performance of contract or fulfilment of the requested service such as processing your enquiry or providing bespoke technical support.

After completion of the performance of contract or fulfilment of the requested service the personal data you have provided is first securely stored for future reference and or further support. After a period of 24 months the data you have provided is securely deleted.

All forms and emails are delivered by a Hypertext Transfer Protocol Secure HTTPS method.

Submit

*

reCAPTCHA is required.