Standard Specifications

• RCD 2 (Recreational Craft Directive 2013/53/EU) exhaust emission compliant.
• EPA (U.S Environmental Protection Agency) Tier III – 40 CFR 1042 exhaust emission compliant. Note: Extra charges apply and this must be specified at time of order.
• Mechanically governed comes with:
  • Heat exchanger, header tank and water cooled exhaust manifold.
  • Fresh and sea water pump, injection bend for a wet exhaust.
  • Mechanical fuel lift pump, fuel and oil filtration.
  • Flywheel housing and drive plate with heavy inertia ring for super smooth running at low rpm.
  • Special quiet air intake filter.
• 70 Amp, 12 Volt battery charging alternator.
• Complete with ‘ABV’ control panel with tachometer with running hour recorder, keystart switch, push button stop, green light for ‘power on’, red warning lights and audible alarm for: low oil pressure, high water temperature and engine alternator ‘no charge; 3m interconnection cable with multi pin plug connector.
• Heavy duty engine feet and flexible mountings.
• ‘Morse’ type end fittings for engine speed and gearbox control.
• Engine test certificate and operators manual.
• Beta red paint.

Gearbox Options & Technical Drawings

Beta Marine offer the following standard gearbox options and reduction ratios. Gearboxes have been selected to match the torque loading of each engine and will be correct for the majority of yachts, motor sailors or motor boats. Find out more…

Bobtail – No Gearbox
Bobtail Engine with Drive Plate & Housing Only	Standard

Technodrive / Twin Disc
TM345 – Hydraulic	Standard
TM345A – 8° Down Angle, Hydraulic	Optional
TM93 – Hydraulic	Optional
TM93A – 8° Down Angle, Hydraulic	Optional

PRM Marine
PRM280 – Hydraulic	Standard
PRM260C – In-line Hydraulic	Optional
PRM500 – Hydraulic	Optional

ZF
ZF45 – Hydraulic	Standard
ZF45A – 8° Down Angle, Hydraulic	Standard
ZF68IV – 12° V Drive, Hydraulic	Standard

Control Panel Options

Beta Marine offer a range of control panels to cater for various requirements. Click on any of the thumbnail images to view a larger more detailed image of the control panel. Find out more…

Electrical Options

We offer a selection of different alternator options (subject to additional cost) to suit most requirements for heat exchanger engine use. However, if you require an alternative solution with specific alternators we can usually design, manufacture and fit suitable alternator supports and pulley drives to suit your needs. Find out more…

Note: Minimum recommended battery: Not included.

12v 180Ah 1050CCA

12 Volt Alternators
70 Amp, 12 Volt Alternator	Standard
120 Amp, 12 Volt Alternator in Lieu of Standard	Optional
70 Amp, 12 Volt Insulated Return Alternator in Lieu of Standard	Optional
100 Amp, 12 Volt Insulated Return Alternator in Lieu of Standard	Optional
175 Amp, 12 Volt Secondary Domestic Alternator	Optional

24 Volt Alternators
55 Amp, 24 Volt Electric Start & Alternator	Optional
80 Amp, 24 Volt Secondary Domestic Alternator	Optional
60 Amp, 24 Volt Secondary Domestic Insulated Return Alternator	Optional

Travel Power
3.5 kVA Travel Power – 230 Volt, Single Phase 50Hz	Optional
5.0 kVA Travel Power – 230 Volt, Single Phase 50Hz	Optional

Special Feet Service

Beta Marine engines have been fitted into tens of thousands of vessels around the world using our standard engine feet. However engine bearers can vary immensely so when a problem arises, our solution is to offer our unique service of designing and manufacturing “Special Engine Feet” to suit your individual engine bearers.

Having designed, manufactured and supplied thousands of bespoke “Special Feet” when required, the additional cost of this option is heavily repaid when your new engine just drops onto your existing engine bearers and lines up with your propeller shaft reducing installation complexity, time and labour. Find out more…

Accessories

Beta Marine seagoing propulsion engines are complemented by a complete range of installation accessories. Find out more…

Literature & Manuals

Beta 70T & Beta 85T
Illustrated Parts List

TM345 & TM345A Gearbox
Operators Maintenance Manual

TM93 & TM93A Gearbox
Operators Maintenance Manual

PRM280 Gearbox
Operators Maintenance Manual

PRM260C In-Line Gearbox
Operators Maintenance Manual

PRM500 Gearbox
Operators Maintenance Manual

ZF25, 25A, 45, 45A, 68A & 68IV Gearbox
Operators Maintenance Manual

TM93 Trolling Valve
Operators Maintenance Manual

TM345 Trolling Valve
Operators Maintenance Manual

Dealer Locator

When ordering an engine we always recommend that you talk to your local Beta Marine Dealer / Distributor about what you are looking for, so that you can agree a specification of the engine and accessories you require and they will then quote you. If you don’t have a local dealer then you or your installation engineer can contact the Beta Marine Help Desk.

International Distributors

When ordering an engine we always recommend that you talk to your local Beta Marine Dealer / Distributor about what you are looking for, so that you can agree a specification of the engine and accessories you require and they will then quote you. If you don’t have a local dealer then you or your installation engineer can contact the Beta Marine Help Desk.

Online Enquiry Form

If you are human, leave this field blank.

Your Name *

Company

(If Applicable)

Contact Phone *

Address

Contact Email *

Country *

Confirm Email *

Enquiry or Comments

Type of Vessel

Length of Vessel (Waterline Length)

Current Engine Type and Power

Where Will Your Vessel be Moored During Installation *

When using the contact form or an email address within this website you will be providing Beta Marine Ltd some very limited personal information. This information is used only in the scope of performance of contract or fulfilment of the requested service such as processing your enquiry or providing bespoke technical support.

After completion of the performance of contract or fulfilment of the requested service the personal data you have provided is first securely stored for future reference and or further support. After a period of 24 months the data you have provided is securely deleted.

All forms and emails are delivered by a Hypertext Transfer Protocol Secure HTTPS method.

Submit

*

reCAPTCHA is required.